Safety Technical Data Sheet (MSDS) for 2-ethyl-1,3-hexanediol

2-ethyl-1,3-hexanediol Safety Data Sheet (MSDS)

List of MSDS

Part 1 Chemical and Enterprise Identification

Part 9 Physical and Chemical Characteristics

Part 2 Hazard Overview

Part 10 Stability and Reactivity

Part 3 Ingredient/Composition Information

Part 11 Toxicological Information

Part 4 Emergency Measures

Part 12 Ecological Information

Part 5 Fire Protection Measures

Part 13 Partial Disposal

Part 6 Emergency Response for Leakage

Part 14 Transportation Information

Part 7 Operation, Disposal and Storage

Part 15 Regulatory Information

Part 8 Contact Control and Personal Protection

Part 16 Other Information

Part 1: Chemical and Enterprise Identification

Chinese Name: 2-ethyl-1,3-hexanediol

Chinese Alias: None

English Name: 2-ethyl-1,3-hexanediol CAS Number: 942

English Alias: Octylene glycol Technical Specification Code: XXX-MSDS-00X

Supplier Name: Fill in according to enterprise modification

Supplier Address: Fill in according to enterprise modification

Supplier Phone: Fill in according to enterprise modification

Supplier Emergency Phone: Fill in according to enterprise modification

Supplier Fax: According to the company's modification, fill in

Supplier Email: According to the company's modification, fill in

Part 2: Hazard Overview

Hazard Category: No information

Invasion Route: Inhalation, ingestion, transdermal absorption

This product has a stimulating effect on the eyes and skin. Inhalation, ingestion, or transdermal absorption may pose a health hazard: harmful.

Environmental Hazard: No Information

Explosive Hazard: No Information

Part 3: Composition/Composition Information

Hazardous Substance Composition: 2-ethyl-1,3-hexanediol

Content: 100%

Part 4: Emergency Measures

Skin Contact: Remove contaminated clothing and rinse with running water.

Eye contact: Immediately open the upper and lower eyelids and rinse with flowing water for 15 minutes. Seek medical attention.

Inhalation: Remove from the scene to a place with fresh air. Seek medical attention.

Ingestion: If ingested by mistake, rinse mouth with water and seek medical attention.

Part 5: Fire Protection Measures

Hazardous characteristics: There is a risk of combustion when exposed to high heat, open flames, or contact with oxidants.
.

Fire hazard classification according to building regulations:

C

Hazardous combustion products:

Carbon monoxide, carbon dioxide.

Extinguishing method: foggy water, foam, carbon dioxide, dry powder, sand.

Part VI: Leakage emergency treatment: fog water, foam, carbon dioxide, dry powder, sand.

Part 7: Handling and Storage

Operating precautions:

No information

Storage precautions:

Storage and transportation precautions: Store in a cool, dry, well ventilated warehouse.
. Stay away from sources of fire and heat. The warehouse temperature should not exceed 30 ℃. Keep the container sealed. It should be stored separately from oxidants, acids, and bases. Handle with care during transportation to prevent damage to packaging and containers.

Part 8: Contact Control/Personal Protection

China MAC (mg/m3):

Before the establishment of standards

Former Soviet Union MAC (mg/m3):

Without the establishment of standards

TLVTN: No data

TLVWN: No data

Exposure limit: US TLV-TWA: Without the establishment of standards US TLV-STEL: Without the establishment of standards

Monitoring method: No data

Engineering control: Production process is closed and fully ventilated.
.

Respiratory protection: When the concentration in the air is high, a gas mask should be worn.

Eye protection: Wear chemical safety goggles.

Body protection: Wear work clothes.

Hand protection: Wear protective gloves if necessary.

Other protections: No information

Part 9: Physical and chemical properties

pH: No information

Melting point (℃): -40

Boiling point (℃): 243.1

Molecular formula: C8H18O2

Main components: No information

Critical temperature (℃): No information

Logarithmic value of octanol/water partition coefficient:

Saturated vapor pressure (kPa):
<0.0013 (20 ℃)

Flash point (℃)): 126.7 (O.C)

Ignition temperature (℃): N/A

Spontaneous combustion temperature: N/A

Combustibility: Flammable

Solubility:

Slightly soluble in water, soluble in ethanol and ether.

Relative density (water=1): 0.94 (20 ℃)

Relative vapor density (air=1): 5.03

Molecular weight: 146.22

Combustion heat (kJ/mol):

No information available

Critical pressure (MPa):

No information available

Explosion information available
Limit% (V/V):
Explosion information available
Limit% (V/V):

Appearance and properties: colorless, odorless liquid, hygroscopic.

Main uses: Used as a carrier and solvent for boric acid complexing agents, pharmaceuticals, coatings, cosmetics, insect repellents, etc.

Other physicochemical properties:

No information available

Part 10: Stability and reactivity

Stability: Stable

Prohibited compounds: Strong oxidants, strong reducing agents, strong acids, acylchlorides, anhydrides.
.

Conditions to avoid contact: No data available

Aggregation hazard: No occurrence

Decomposition products: No data available

Part 11: Toxicological information

Acute toxicity: LD50: 1400mg/kg (oral administration to rats);
; 2000mg/kg (rabbit transdermal) LC50:

Subacute and chronic toxicity: no data

RTECS: MO2625000

Irritation: no data

Allergy: no data

Mutability: no data

Teratoxicity: no data

Carcinogenicity: no data

Part 12: Ecological data

Ecotoxicity:

No data
Biodegradability: no data

Non biodegradation: no data


Bioaccumulation or lack of data accumulation:

Smoking is strictly prohibited in other hazardous work sites.
. Maintain good hygiene habits. Usage:

Part 13: Waste Disposal

Waste Nature: Before disposal, relevant national and local regulations should be consulted.
. Suggest using incineration method for disposal.

Disposal Party No Information Law:

Waste Precautions No Information Item:

Part 14: Transport Information

Dangerous Goods Number: No Information

UN Number: No Information

IMDG Code Page:

No Information

Packaging Label: No Information

Packaging Category: No Information

Packaging Method: No Information

Transport Precautions: No Information

Part 15: Regulatory Information

Regulatory Information: No Information

Part 16: Other Information

[1] Reference: Duan Xingxin • Practical Handbook of Fine Organic Synthesis • Beijing: Chemical Industry Press Reference: • 2000:52 Reference book: Handbook of Organic Compound Synthesis/Edited by Sun Changjun, Wang Xiuju, and Sun Fengyun Beijing: Chemical Industry Press, 2011.8 ISBN 97811519-5

Revision explanation: First edition

Other information: MDL number: MFCD00004578 PubChem number: 24894489 BRN number 1735324
Filling department:

Review department:

Used for organic synthesis, can produce polyester resin, polyester plasticizer, polyurethane resin, etc.
. Common uses of this product: It is an effective insect repellent for mosquitoes and flies, and can also be used in the production of cosmetics or as an ink solvent. Used as a carrier and solvent for boronic acid complexing agents, pharmaceuticals, coatings, cosmetics, insect repellents, etc.

Molecular Structure Data:

1. Molar Refractive Index: 42.092, Molar Volume (cm3/mol): 156.3 3, Isometric Specific Capacity (90.2K): 378.64, Surface Tension (dyne/cm): 34.35, Dielectric Constant: N/A 6. Bipolar Distance (10-24cm3): N/A 7. Polarity: 16.68

1. Hydrophobic Parameter Calculation Reference Value (XlogP): 1.32. Number of Hydrogen Bond Donors: 23. Number of Hydrogen Bond Receptors: 24. Number of Rotating Chemical Bonds: 55. Number of Mutants: N/A 6. Topological Molecular Polarity Surface Area Calculation Chemical Number: 40.57. Number of Heavy Atoms: 108. Surface Charge: 09. Complexity: 73.710. Isotope atomic data: Quantity: 011. Determined number of atomic stereocenters: 012. Uncertain number of atomic stereocenters: 213. Determined number of chemical bond stereocenters: 014. Uncertain number of chemical bond stereocenters: 015. Number of covalent bond units: 1